Step 5: install the camera to the tilted mount, Step 6: close the cover, Installation guide – ACTi Outdoor Hemispheric / Fisheye Dome on Straight Wall with Tilted Mount User Manual

Page 14

Installation Guide

Step 5: Install the Camera to the Tilted Mount

If necessary, insert a memory card into the card slot of the camera.

Attach the camera to the tilted mount using the three (3) screws supplied in the tilted mount

package.

NOTE:

Make sure the mounting screws have rubber rings. If the screws you received do not

have rubber rings, please contact your local sales agents or our

for support.

Step 6: Close the Cover

Tighten the three (3) screws to secure the cover.

Final installation looks like the illustration below.

Cable Passes Through the Wall

Cables Goes Along the Wall

Rubber Ring