beautypg.com

Step 2: prepare the camera – ACTi Outdoor Hemispheric / Fisheye Dome on Straight Wall with Tilted Mount User Manual

Page 4

background image

www.acti.com

Installation Guide

4

3.

Install the tilted mount using the two (2) supplied screws.

Step 2: Prepare the Camera

1.

If the cables will pass through the wall

, remove the cap covering the bottom hole of the

camera, and attach the cap to the side hole to close it. The network cable will pass the

bottom hole to the camera.

If the cables will be routed along the wall

, skip this step.

2.

Loosen the three (3) screws using the supplied hex wrench.