Network tab – ZeeVee Using Maestro (QAM) User Manual

Page 15

Text mode
Original mode

N A | 1 5

w w w . z e e v e e . c o m

U S I N G M A E S T R O

Network Tab

— Assigning IP Type and Address

IP Type –

Defines the IP address the device uses, either uses a DHCP (default) to get a dynamic IP

address or a static IP address. After saving changed IP type, the system requires a reboot to initiate
the new IP address.

IP Address —

Displays and allows you to configure the current IP address of the unit. If you choose

Set All here, Maestro uses its auto-increment function to assign subsequent addresses (see page 5).

Mask and Def Gateway –

Enter the subnet mask you want to use. The Mask field is required.

When using a static IP address, you must configure the IP Address, Mask, and Default Gateway
manually. When using DHCP, these settings are assigned dynamically.