ZeeVee Using Maestro (QAM) - Manual (Page 12)

N A | 1 2 w w w . z e e v e e . c o m
U S I N G M A E S T R O
Device Tab
— Naming Device and Using Action Buttons (Including ZvShow)
The Device tab allows you to make device-specific configurations, such as changing the device password and
updating firmware.
Reboot – Forces a restart of the unit. Clicking this
button takes down channels for a few minutes.
Defaults – Resets system to factory default settings,
including password and IP information. Clicking this
button takes down channels for a few minutes.
Password – Allows you to change the device
password. Clicking this button brings up a wizard
that walks you through entering a new password.
ZvShow – Allows you to upload a video file that will broadcast on an “extra” channel.
This channel is available in addition to the channels already offered on the unit. The
content for the video on this channel comes from a stored video resident on the ZeeVee
product. The video is played and looped onto the new ZvShow Channel continuously.
The video file must be converted using the ZvConvert tool, which can be found on our
website at http://www.zeevee.com/support/tools.
For detailed instructions on using the ZvConvert and ZvShow channel, please see the
application note on our website http://zeevee.com/resources/documentation.
Device name – Allows you to name the device
for easy recognition when managing multiple
units. This is the device’s identifying name
within the network, and this name also controls
how devices are ordered within Maestro.
When you choose Set All the Auto-Name
function allows you to set information in a few
easy steps. See page 3.