Westermo RM-115S - Manual (Page 29)

115S Serial I/O Module User Manual
man_115S_1.14.docx Page 29
4.3 115S-11 configuration
4.3.1 Pulsed Inputs
Choose the Pulse Inputs Setup page, as shown in Figure 4-4.
Figure 4-4: Pulse inputs setup. Only available on a 115S-11 module.
Clicking the Read from 115S button reads the existing maximum pulse rate settings from
the 115S and displays them on the form.
If pulse rate is to be used, the maximum pulse input rate must be set. The pulse rate value
is calculated as a fraction of the maximum pulse input rate. Specify the maximum pulse
input rate in pulses per minute. The highest allowable pulse input rate is 60000 pulses per
minute, or 1kHz.
Once the maximum pulse rates are specified, click the Save Max Rates button to save the
data to the 115S module.
The pulse input feature can be tested on the DIO Check page (refer section 5.1).