Epson ELP-3000 - Manual (Page 26)

Connecting to a desktop Macintosh
Before beginning, turn off the projector and Macintosh if they are on. To access the
connectors on the projector, push open the cover located on the right side of the
projector, under the handle.
1. Attach the Macintosh adapters provided with the projector to the appropriate
connectors
on the Y-cable. Connect the MONITOR adapter to the MONITOR
connector (la), and connect the VGA adapter to the VGA connector (1b).
2. Disconnect the monitor cable from the monitor port on the back of the
Macintosh and connect it to the MONITOR Macintosh adapter.
3. Connect the VGA adapter (attached to the Y-cable) to the Macintosh’s monitor
port.
4. Connect the Y-cable’s LCD connector to the projector’s Computer IN/OUT port.
5.
Tighten the screws for all connectors to make sure they are fastened securely.
Connecting to a Computer 9