Welltech SIPPBX 6200 V.x.2 Quick Start - Manual (Page 32)

Welltech Computer Co., Ltd.
Figure 5.6
Ⅲ: Subscriber to Subscriber Internal Call Test
Please refer to the following steps to do a simple test about subscriber to
subscriber internal call.
Step 1: Telephone 101 dials 301.
Step 2: Telephone 301 should be ringing.
Step 3: Telephone 301 answers and talks to 101.
Ⅳ: Subscriber to PSTN Gateway Outgoing Call Test
Please refer to the following steps to do a simple test about subscriber to
PSTN Gateway outgoing call test.
Step 1: Make a call from subscriber 101 to PSTN Gateway by dialing PSTN
number xxx-xxxx.
Step 2: Telephone number 101 should hear ring tone.
Step 3: PSTN number answers and talks to 101.
Ⅴ: PSTN Gateway to Subscriber Auto Attend Call Test
Please refer to the following steps to do a simple test about PSTN
Gateway to subscriber Auto Attendant call test.
Step 1: Make a call to PSTN line.
Step 2: PSTN side should hear Auto Attendant Call flow.
Step 3: Input extension number 101 for transfer.
Step 4: Telephone 101 should be ringing.
Step 5: Telephone 101 answers and talks to PSTN number.
SIPPBX 6200 Quick Guide – V x.2 32