Watson-Marlow PF22 - Manual (Page 29)

Operators Manual
PF22
PF22 OM EN 74-132-005 v1.02.doc Version: 1.02 Page 29 of 34
8.2 Print current status
Function 24 prints the current parameters, and print-outs should be made after completion of the
filling series.
The printing is to be started in the following way:
<2>+<4>+, and the following display will be shown:
F24 PRN STATUS (Y/N):_
F 1: VOLUME (ml): 50.50
Press the key to confirm start of printing, and the printer will start.
Example of print-out:
* Flexicon PF22 V1.1 *
OPERATOR 2641
BATCH NO. 9604084438
VOLUME (ml) 50.50
FILLS PER MIN 30
NUMBER OF FILLS 100
AT FILL NO: 51
RECALIB VOL (ml): 50.53
AT FILL NO:
74
RECALIB VOL (ml): 50.52
In addition to registering the filling series, PF22 also registers when and from which value re-
calibrations were carried out.
If the print-out of the current parameters is left in the printer till the status print-out has been made,
this will give a full production documentation which might look like the one shown on next page.