Extron electronic Distribution Amplifiers DVI DA6 Plus - Manual (Page 19)

DVI DA Plus Series • Installation and Operation 2-7
Rear Panel Features
The rear panels for the DVI DA4 Plus (top panel), the DVI DA6
Plus (middle panel), and DVI DA8 Plus (bottom panel) are
shown below:
12V
1.0A MAX
POWER DVI-D INPUT DVI-D OUTPUT
1 2 3 4
DVI DA4 Plus
2 3 4
12V
1.5A MAX
POWER DVI-D INPUT DVI-D OUTPUT
1 2 3 4 5 6 7 8
DVI DA8 Plus
12V
1.5A MAX
POWER DVI-D INPUT DVI-D OUTPUT
1 2 3 4 5 6
DVI DA6 Plus
2 3 4
Rear panel features
b
Power input — Connect the external power supply (provided)
to the 3.5 mm, 2-pole captive screw power receptacle.
c
Input connector — Connect the input signal to the female DVI-I
connector. The DVI input signal is equalized to ensure integrity.
d
Output Connectors — Connect up to four (DVI DA4 Plus),
six (DVI DA6 Plus) or eight (DVI DA8 Plus) DVI-D outputs to
display devices, using the female DVI-I connectors.
N Although these distribution amplifiers have DVI-I
connectors, they are only compatible with single-link
DVI-D video signals.
N The DVI DA Plus series distribution amplifiers are not
HDCP compliant.