Extron electronic Distribution Amplifiers DVI DA6 Plus - Manual (Page 10)

DVI DA Plus Series • Introduction
Introduction
1-2
About This Manual
This manual describes the installation, operation, and
specifications of the Extron DVI DA4 Plus, DVI DA6 Plus, and
DVI DA8 Plus Distribution Amplifiers.
Unless stated otherwise, all references to the "distribution
amplifier" or "DVI DA Plus Series" in this manual refer to the
features or operation of all three models.
About the DVI DA Plus Series
These Digital Visual Interface (DVI) Distribution Amplifiers
(DAs) accept one single link DVI-D input and distribute four
(DVI DA4 Plus), six (DVI DA6 Plus), or eight (DVI DA8 Plus)
single link DVI-D output signals.
All three models use Extron's EDID Minder feature to maintain
continuous EDID (Extended Display Identification Data)
communication with the attached source. This ensures that the
DVI source powers up correctly and maintains a proper video
output, even if the display is off.
The DVI DA4 Plus is 1U high and half a rack wide. The DVI
DA6 Plus and DVI DA8 Plus are both 1U high and a full rack
wide. All three models offer a variety of mounting options.
The illustration below shows a typical application of the
DVI DA8 Plus.
12V 0.4A MA X POWE R
DVI-D INPU
T
DVI-D OUTPU
T
1
2
3
4
5
6
7
8
DVI DA8 Plus
Computer
with
DVI Output
Local
Monitor
Display
with
DVI Input
Display
with
DVI Input
Extron
DVI DA8 Plus
Distribution Amplifier