Watson-Marlow 605Di - Manual (Page 15)

14
605L care and maintenance
Check all moving parts for freedom of movement occasionally. If aggressive fluids are spilt onto the pumphead, clean using a mild
detergent only.
605L track adjustment
The track is set for 4.0mm wall tubing up to 16.0mm bore. Alteration of this setting using the pan head screws may be necessary to
optimise performance if non-standard tubing is used. The factory setting is 20.3mm vertically from the rotor side of the sprung track
to the top of the track cover.
Pumphead spares
Number Spare Description Number Spare Description
1 MRA0141A Track assembly 6 MRA0150A Rotor assembly
2 MR 0851S Cover plate 7 MR 0850S Front plate
3 SW 0050 Proximity switch 8 MRA0144A Tube locating peg
4 MRA0143A Adaptor 9 069.4001.000 Tube clamp set
5 BB 0018 Shaft bearing