Watson-Marlow MR-Series - Manual (Page 24)

Revision 1.4 / August 2013 Visit our website at www.masosine.com 24
Assembly Instructions for Installation of Front Cover Hinge, cont.
Figure 13 – Front Cover Hinge
Item Description Part Number Qty
1a* Ring Arm (MR-150) 050P460.1304A1 1
1b* Ring Arm (MR-135) 035P460.1304A1 1
2 Pivot Arm 035P461.1304A1 1
3 Cap Screw 035P426.1300A1 2
4 Washer, Plastic, 3/8 035P463.2636A1 2
5 Washer, SS, 3/8 035P463.1304A1 1
6 Bolt, 3/8-16 x 1-3/4 035P464.1300A1 1
7 Hex Nut, 3/8 – 16 035P465.1300A1 1
8 Rod End, Female 035P466.1303A1 1
9 Bolt, 3/8-24 x 1-1/4 035P467.1300A1 1
10 Bolt, 3/8-16 x 1-1/4 035P468.1300A1 1
11 Washer, 3/8 035P469.1300A1 5
12 Hex Nut, 3/8 – 24 035P470.1300A1 1
*For the MR-150, use item 1 a; for the MR-135, use item 1 b