HP Elite X3 - Manual (Page 19)

Connecting to the HP Elite x3
Wired connection
To connect the HP Elite x3 to the lap dock using the included cable:
1. Press and hold the power button until the lap dock turns on.
2. Connect the included cable to the HP Elite x3 port on the left side of the lap dock.
3. Connect the other end of the cable to the connector on the HP Elite x3.
NOTE: The first time you connect the HP Elite x3 to the lap dock, select I see it on the HP Elite x3 and
follow the on-screen instructions.
TIP: There might be a slight delay before the lap dock is ready to be used.
NOTE: While the HP Elite x3 is connected to the lap dock via the included cable, the lap dock charges the HP
Elite x3.
Wireless connection
TIP: For optimal wireless performance, connect the HP Elite x3 to a wireless router at 5 GHz.
If there is interference from other wireless devices, use a wired connection to connect the HP Elite x3 to the
lap dock. See
Wired connection on page 13 .
1. Press and hold the power button until the lap dock turns on.
2. Swipe left on the Start screen to display all apps, and then tap Continuum.
3. The first time you connect, select Set up.
Setting up the lap dock 13