HP Elite X3 - Manual (Page 10)

Left
Component Description
(1) Micro-HDMI port Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio component,
or a high-speed High Definition Multimedia Interface (HDMI)
device.
(2) HP Elite x3 connector Connects the HP Elite x3 to the lap dock using the included USB
Type-C cable.
NOTE: While the HP Elite x3 is connected to the lap dock via
the included cable, the lap dock charges the HP Elite x3.
(3) Power button ● When the lap dock is off, press and hold the button to turn
on the lap dock.
● When the lap dock is on, press the button briefly to initiate
Sleep.
● When the lap dock is in the Sleep state, press the button
briefly to exit Sleep.
● When the lap dock is on, press and hold the button for 15
seconds to reset the lap dock.
If the lap dock has stopped responding and shutdown
procedures are ineffective, press and hold the power button for
at least 15 seconds to reset the lap dock.
(4) Audio-out (headphone) jack Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable.
WARNING! To reduce the risk of personal injury, adjust the
volume before using headphones, earbuds, or a headset. For
additional safety information, see the Regulatory, Safety and
Environmental Notices.
NOTE: When a device is connected to a headphone jack, the
lap dock speakers are disabled.
4 Chapter 2 Components