Vuzix STAR 1200 User Guide - Manual (Page 40)

38
Accutilt Adjustment
Your Wrap 1200 is equipped with a patented view angle adjustment called
“Accutilt”. The Accutilt mechanism allows you to rotating and tilt the
display module up and down approximately 15° to achieve the best quality
display.
To adjust the viewing angle:
§ Pivot the display assembly to achieve the best quality display.
Camera Removal
The STAR camera assembly is an optional use accessory and is not required
for the operation of the display module and other components.
To remove the STAR camera assembly:
§ Loosen the retainer screws on either side of the camera assembly. They
require a 0.35 Allen wrench (hex key).
§ Pull the camera assembly off the receivers protruding through the eyewear
shields (lens).
§ Reverse the above procedure to reinstall the camera assembly.