Visara 1330-X02 - Manual (Page 37)

701333-004 2-23
Preparing to Operate the 1330
drive. The bars will snap into the OFF position, as shown in Figure 2-20.
Roller Drive
Shown OFF
Paper Supports
Slide Bar
Slide Bar
Figure 2-20. DOD Option with Roller Drive
Next is the procedure for using the Document Insertion Device (DID) option.
Installing Forms Using the DID Option
Refer to Figure 2-21 for a picture of the Forms Handler module set for the DID option. In
this procedure, first set up the module for forms loading, next insert the module into the
printer, and finally load the forms into the printer.
Paper Supports
Figure 2-21. Forms Handler Module (DID Option)
1. Make sure the printer power is on, and the printer is in Stop mode.
2. For ease of handling, lay the module on top of the printer.