Visara 1330-X02 - Manual (Page 119)

701333-004 7-5
Maintaining the 1330
Caution
Failure to enter the correct print head style under Configuration Option 404 can result in
poor print head performance and can damage the print head.
22. Press the Save key and the Stop key. If you plan to print in data processing quality,
enter 1. If you want to print in data processing text quality, enter 2. If you want to
print in near letter quality, enter 3. Press Save.
23. You can resume printing by pressing Stop until STOP is displayed, then Start.
Print Head Connector -
Long
Key Location
Ribbon Shifter Connector
Hook
Figure 7-4. Carriage - Side View
Checking Character Width and Print Registration
After changing the print head, you may want to check the printed character width and
print registration. Print registration refers to the proper vertical alignment of characters
from line to line at the right and left margins of the printed text. When the print registration
is correct, characters are properly aligned at the margins, as shown in Figure 7-5.
H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H
H H H H H H H H H H H H H H H H H H H H H H H H H
Figure 7-5. Proper Print Registration