Verilink PRISM 4001 (34-00244) Product Manual - Manual (Page 8)

General 1-4 PRISM 4001
This equipment complies with Part 68 of the FCC Rules. On
the rear or bottom of the unit is a label that contains the FCC
registration number and other information. If requested, pro-
vide this information to the telephone company.
Warranty
TxPORT warrants each unit against defects in material and
workmanship for a period of five years from the date the
unit was shipped to the customer. If the unit malfunctions at
any time during the warranty period, TxPORT will repair,
or at TxPORT’s option, replace the unit free of charge.
The remedies listed herein are the users sole and exclusive
remedies. TxPORT shall not be liable for any indirect,
direct, incidental or consequential damages. The owner
must return the unit to the factory, shipping prepaid and
packaged to the best commercial standard for electronic
equipment. TxPORT will pay shipping charges for delivery
on return. The customer is responsible for mode and cost of
shipment to TxPORT. This warranty does not apply if the
unit has been damaged by accident, misuse or as a result of
service or modification by other than TxPORT personnel.
Ordering Numbers
Each 4001 unit (Table 1-B) is supplied with the P RISM 4001
reference manual and is equipped with both a V.35 and
EIA232 data port (F-4001-01-111 is the default part num-
ber). Also provided is an 8-pin modular-to-receptacle 1051
shelf to DDS adapter (PN 9-1001-075-1).
The optional equipment shown in Table 1-C may also be
needed for the operation of the unit.
Table 1-B Equipment Part Numbers
F-4001-101--111D
D
1
2
3
P RISM 4001 Module
Dial Backup option
RS-232 External Backup
V.32 Modem Backup
ISDN *
* Not released at time of printing
Table 1-C Optional Equipment Part Numbers
Part Number Optional Equipment
Network Cables
9-1001-070-010 DDS cross-over kit
9-1001-004-010 8-pin RJ-48 to 8-pin RJ-48 Network Cable
Supervisory Adapters
9-1001-015-1
9-1001-015-2 DB-25 male to 8-pin RJ-48 (terminal to SUPV)
DB-25 female to 8-pin RJ-48 (terminal to SUPV)
9-1001-016-1
9-1001-016-2 DB-25 male to 8-pin RJ-48 (modem to SUPV)
DB-25 female to 8-pin RJ-48 (modem to SUPV)
Supervisory Cable and Cable/Adapter Kit
9-1001-073-2 DB-9 female to 8-pin RJ-48 (terminal to SUPV) kit
9-1544-619-xxx 8-pin RJ-48 to 8-pin RJ-48 cable
Dial Back Up Cables
9-1001-074-1
9-1001-074-2 DB-25 male to 10-pin mod (modem to DBU)
DB-25 female to 10-pin mod (modem to DBU)
9-1001-034-010 10- pin to 10-pin mod (DBU)
V.35 Cables
9-1001-001-xxx V.35 male to male null cable
9-1001-311-xxx V.35 male to male, straight through
9-1001-312-xxx V.35 male to female, straight through
RS-232 Cables
9-1001-044-010 RS-232 male to male null cable
9-1001-211-xxx RS-232 male to male, straight through
9-1001-212 -xxx RS-232 male to female, straight through
9-1001-222 -xxx RS-232 female to female, straight through
xxx = length
005 = 5 feet
010 = 10 feet
020 = 20 feet