Dbu dial string, Initialization string, Disconnection string – Verilink PRISM 4001 (34-00244) Product Manual User Manual
Page 32: Reset string 1-5, Summary screen, Figure 4-16 summary, Current column, Saved column, Switches column, Summary screen -12

4-12 Terminal Operation
PRISM 4001
CALLBACK ORIGINATE and CALLBACK ANSWER
units for them to connect.
DBU D
IAL
S
TRING
Used to enter the telephone number (up to 30 characters) the
4001 calls. This is a don't care field when the Dial Backup
Mode is ANSWER.
I
NITIALIZATION
S
TRING
Enter the modem initialization string (up to 30 characters)
here. See the modem documentation for further information.
The default setting is AT&F.
D
ISCONNECTION
S
TRING
Identifies the character string (up to 30 characters) to be out-
put when the modem session is terminated. The default set-
ting is ATH0.
R
ESET
S
TRING
1-5
Used for additional initialization commands, and are sent in the
event of a DBU failure. In order to reduce the average DBU
connection time, they are not sent at every DBU attempt.
Consult the DBU device manual for further commands.
Summary Screen
The Summary screen (Figure 4-16) is a display-only screen
which summarizes configuration settings in three columns:
C
URRENT
C
OLUMN
The Current column shows the settings the 4001 is currently
running.
S
AVED
C
OLUMN
The Saved shows the settings saved in the Flash EEPROM.
S
WITCHES
C
OLUMN
The Switches column shows the actual DIP switch posi-
tions.
SUPV Baud Rate, NMS Baud Rate, Unit ID, and Boot
modes are switch settings only and do not appear in the
saved column on the Summary Screen.
4001 DDS x.xx/x.xx
PRISM 4001
Local Screen
4001 DDS x.xx/x.xx
Unit Address: X
------------------------------- SUMMARY
--------------------------------
Configuration Item
Current
Saved
Switches
Other Information
------------------
-------
-----
--------
-----------------
DTE Baud Rate:
57.6K
57.6K
56K
Serial Num: 000054
Line Baud Rate:
64K
64K
56K
Port Type: RS232D
Line Clk Source:
INT
INT
NET
Loop Mode:
BIDIR
BIDIR
BIDIR
RTS Delay Norm/Dbl:
NORMAL
NORMAL
NORMAL
RTS/CTS Norm/On:
NORMAL
NORMAL
NORMAL
Data Mode:
TXPORT
TXPORT
STANDARD
DTE Sync/Async:
ASYNC
ASYNC
SYNC
DBU Rate:
57.6K
57.6K
57.6K
DBU Enable:
DISABLE
DISABLE
DISABLE
Supv Baud Rate:
19.2K
-----
19.2K
NMS Baud Rate:
19.2K
-----
19.2K
Unit ID:
3
---
3
Boot Mode:
SAVED
-----
SAVED
-----------------------------------MESSAGES-----------------------------
Figure 4-16 Summary