Verilink PRISM 3010 Dual DSX-1 (34-00250.2) Product Manual - Manual (Page 9)

2
O
PERATION
Introduction This chapter describes the screens and menus associated with the PRISM 3030 and
3060 front panel LCD interface for the Dual DSX card. Chapter Terminal
Operation on page 7 discusses the screens and menus associated with the external
terminal interface. In general, the options are the same for both interfaces.
Throughout this manual, all the factory default settings are shown underlined.
Main Menu
Display The Main Menu screen is the first level of access for all the functional menus
available to the user. To activate any of these menus or submenus, use the methods
described in section Menu Components in the Operation chapter of the PRISM
3030 and 3060 manuals. The Main Menu diagram is shown in Figure 2-1.
Figure 2-1 Main Menu Diagram
Dual DSX
Configuration The Dual DSX Configuration
display (shown in Figure 2-2)
allows configuration parameters
to be set the for the Dual DSX
ports (if equipped). Figure 2-3
shows the menu for Dual DSX
configuration.
Figure 2-3 Dual DSX Configuration Screen and Diagram
✍
MAIN MENU Log Off Log On
T1 NET
Configuration
T1 DTE
Configuration
DTE Port
Configuration
Voice Port
Configuration
SNMP
Configuration
Diagnostics System
Utilities
Dual DSX
Configuration
Dual DSX Configuration
Figure 2-2 Dual DSX Configuration Screen
Idle or Thru
(on a per-
channel basis)
Framing
Type
Line
Code
DSX
Level
ESF
D4
0–110 ft
111–220 ft
221–330 ft
331–440 ft
441–550 ft
551–660 ft
> 660 ft
Channels
1–24
Disable
Enable
(on a
per-channel
basis)
Signalling
Insertion
Alarm
on LOS
Channel
Assignment
Channels
1–24
AMI
B8ZS
Enabled
Disabled