Dukane 8914 - Manual (Page 21)

19
Operating
Using the automatic adjustment feature
1.
Press the AUTO button on the remote control.
 For an RGB signal
The vertical position, the horizontal position, the clock phase
and the horizontal size will be automatically adjusted.
And the aspect ratio will be automatically selected. Make sure that the
application window is set to its maximum size prior to attempting to use this
feature. A dark picture may still be incorrectly adjusted. Use a bright picture
when adjusting.
 For a video signal or s-video signal
The video format best suited for the respective input signal and the aspect
ratio will be selected automatically.
This function is available only when the AUTO mode is selected to the
VIDEO FORMAT item in the INPUT menu (  30) . For a component video
signal, the signal type is identifi ed automatically independently of this
function.
 For a video signal, s-video signal or component video signal
The vertical position and horizontal position will be automatically adjusted.
 For a component video signal
The aspect ratio will be automatically selected.
The clock phase will be automatically adjusted.
● The automatic adjustment operation requires approximately 10 seconds. Also
please note that it may not function correctly with some input.
Adjusting the position
1.
Press the POSITION button on the remote control.
The “POSITION” indication will appear on the screen.
2.
Use the cursor buttons ▲/▼/◄/► to adjust the picture
position.
When you want to reset the operation, press the RESET button on the remote
control during the operation.
To complete this operation, press the POSITION button again. Even if you don’t
do anything, the dialog will automatically disappear after a few seconds.
● When this function is performed at a video signal, a certain extra such as a line
may appear outside a picture.
VIDEO RGB SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE
POSITION
ESC
ENTER
MENU
RESET
VIDEO RGB SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE
POSITION
ESC
ENTER
MENU
RESET