Upsite 10098 Extended 6 x 60 Brush - Manual (Page 2)

2
Designer & Manufacturer
(888) 982-7800 www.upsite.com
Designer & Manufacturer
(888) 982-7800 www.upsite.com
Tools and Preparation Required for Installation
Tools Required:
• Bandsaw, table saw, miter saw or other appropriate non-ferrous metal cutting tool
(Warning: Do not attempt to cut aluminum with wood cutting blades.)
• Hand tools, including bolt cutters, pliers, hammer (or mallet), stake and metal file
Preparation:
Determine the maximum dimensions of the trimmed cutout or opening in the raised floor. To
ensure stability and proper sealing, the KoldLok Extended Raised Floor Grommet should have
a minimum surface-to-floor contact of 1 inch (25mm) on three sides of the cutout (Does not
apply when grommet is installed facing down - See Install Procedures for more information)
Accurately measure and mark the desired length on the metal extrusion for cutting.
Determine whether to install grommets by screwing the product directly to the floor using
self-tapping screws or by applying double sided adhesive tape. Optional mounting screws or
non-particulating adhesive tape are available for custom installation. Minimum order may
apply. Please call for details.
Clean the tile and bottom surface of the grommet using an alcohol wipe or a clean cotton
cloth, damp with a solution of at least 50 percent isopropyl alcohol.
HELPFUL TIP: When choosing your cleaning cloth, do not use fabric or paper that will disin-
tegrate or leave particles that could interfere with the adhesive or contribute to airborne
contamination.
Dimensions and Cutting Requirements Inches (W x D) Millimeters (W x D)
Part No. 10097 (3”x60”) - Overall size 60” x 5.998” 610 x 152mm
Maximum cutout size sealed 60” x 4” 610 x 102mm
Usable cable area 60” x 2.5” 610 x 64mm
Product height above the raised floor 1” w/ adhesive option 25mm w/ adhesive option
Part No. 10098 (6”x60”) - Overall size 60” x 9.025” 610 x 229mm
Maximum cutout size sealed 60 ” x 7” 610 x 178mm
Usable cable area 60” x 5.5” 610 x 140mm
Product height above the raised floor 1” w/ adhesive option 25mm w/ adhesive option