Upsite 20101 Wave Cover - Manual (Page 2)

Installation Guide
KoldLok Wave™ Split Integral Grommet
General Information
Effective Installation of Cables
In order to minimize any air loss from under the raised floor plenum, make sure to allow
for adequate slack in the cables. If the cables are under too much tension, the grommet
may be pulled apart, resulting in a gap that will cause an increase in the flow rate of air
escaping from under the raised floor.
Maintaining Proper Cooling of Equipment
Failure to follow computer manufacturer’s guidelines for maintaining proper cooling
may result in the overheating of equipment. Before sealing cable cutouts, ensure that
there is adequate air flow to the intake side of computer equipment or cabinets through
devices such as perforated floor tiles or grates. Achieving proper airflow to the intake
side of computer equipment and/or cabinets is the responsibility of the customer.
Safety Requirements
Installers must be familiar with standard safety and risk management practices when
working in raised floor environments and when modifying floor tiles.
An optional cover is available to ensure greater safety before rack and cable installation.
Customer Support
If you have any questions, please contact us at:
(888) 982-7800, M–F, 9AM–5PM MST or email
us at: [email protected]
Upsite Technologies, Inc.
8100 Lang Avenue NE, Suite 301
Albuquerque, NM 87109
P: (505) 798-0200 | F: (505) 798-0236