Triplett CamView W35v – PN: 8055 - Manual (Page 28)

Page 27
10: Troubleshooting
Problem Reason Solution
Won’t turn on
Batteries discharged Charge battery
Batteries installed Install batteries
No video signal input
incorrectly correctly
Bad battery Clean the battery
connections terminals
Apply video signal
to the input
Monitor turns off
Batteries discharged Charge battery
Video signal removed Reapply video signal
Short battery life
Battery is cold
Warm monitor
before using
Bad battery Clean the battery
connections terminals
Battery has been Replace with new
charged too many times batteries
Batteries won’t charge
Batteries installed Install batteries
incorrectly correctly
Battery has been Replace with new
batteries
Charging too slow
Temperature is Charge battery at
too low indoor temperature
charged too many times