Camview w35 manual proof17 – Triplett CamView W35v – PN: 8055 User Manual
Page 17
Page 16
Adjusting the Screen Settings:
To adjust the screen settings, a good video signal must be applied
to the monitor. If a video signal is not applied, the OSD (On Screen
Display) cannot be accessed.
With a video signal applied to the monitor, press and release the MENU
The provided power cable terminates in a 5.5mm male
coaxial connector. The center pin is positive polarity. The connector
matches the connector found on many basic video cameras. Professional
cameras often use bare wire power connections to screw terminals or
wire clamps. The user must provide whatever adaptor is necessary to
work with the camera brands he installs.
When the 12VDC output is being used, the battery life of the CamView
is reduced to as little as 1 hour, depending on the load presented by the
camera. Hence, for maximum battery life, it is advisable to only power up
the camera as necessary and to complete the adjustments in the most
efficient manner.
Using 12VDC Camera Power Continued: