Triplett 310-TEL - Manual (Page 18)

18
AC VOLTAGE MEASUREMENTS
0-3 through 0-300 Volts:
1. Insert the test leads into the appropriate jacks.
(Red to V•O•M, Black to COM)
2. Set Range Switch to appropriate ACV range.
3. Connect probes across circuit to be measured.
4. Energize circuit.
5. Read voltages above 3 Volts on the Black AC-DC
Scale. Read voltages below 3 Volts on the Red
3AC Scale (with the VOM set to 3ACV).
DO NOT TOUCH THE VOM while
it is connected to high voltage!