Triplett 9305 - Manual (Page 3)

2
CAUTIONS
Improper use of this meter can cause damage, shock, injury or
death. Read and understand this user manual before operating
the meter.
Always remove the test leads before replacing the battery.
Inspect the condition of the test leads and the meter itself for
any damage before operating the meter. Repair or replace any
damage before use.
Use great care when making measurements if the voltages are
greater than 25VAC rms or 35VDC. These voltages are
considered a shock hazard.
Remove the battery if the meter is to be stored for long periods.
Always discharge capacitors and remove power from the
device under test before performing Diode, Resistance or
Continuity tests.
• Voltage checks on electrical outlets can be difficult and
misleading because of the uncertainty of connection to the
recessed electrical contacts. Other means should be used to
ensure that the terminals are not "live".
• If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may
be impaired.
Input Limits
Function Maximum Input
A AC 400A
V DC, V AC 600V DC/AC
Frequency, Resistance, Diode,
Continuity , Capacitance Test
600V DC/AC
Temperature (℃/℉) 600V DC/ AC