Data hold button / backlite, For capacitance zero & offset adjustment – Triplett 9305 User Manual

Page 11

NOTE: The detector is designed with high sensitivity. Static

electricity or other sources of energy may randomly
cause the red indicator to light. This is normal
operation.

MODE BUTTON
To select DC/ACV,OHM/ Diode/Continuity

Data Hold Button / Backlite
To freeze the LCD meter reading, press the data hold button.
While data hold is active, the HOLD display icon appears on
the LCD. Press the data hold button again to return to normal
operation.

The HOLD button also turns the Backlite on and off. Press it for
about 2 seconds to turn the light on. Press it again for 2
seconds to turn the light off. The light will turn off automatically
in about 30 minutes if the buttons or knob on the meter are not
operated.

NOTE: Turning the Backlite on and off also turns HOLD on

and off. Use short presses of the button to control
HOLD, and long presses to control the Backlite. Any
combination of HOLD and Backlite can be obtained.

REL BUTTON
For Capacitance Zero & Offset adjustment.

This manual is related to the following products:

9325