Triplett Low Voltage Pro User Manual
Page 7
CABLE
TEST
ID
SL
SBL
CTR
SUB
FR
FL
SBR
SR
1 2
R
Includes TIA586 cable diagram, Pass/Fail, timing (delay, skew)
and impedance (ohms). Models with the Length-
RLQ
Pack
APP (2 and 3) have length (see below).
CABLE TESTING PACK (ALL MODELS)
Get perfect length. Use built-in values or calibrate with your
cable. Adds length readout to Cable Test APP (cable length,
distance to open or short). Also includes RLQ (below).
Included with the Length-RLQ APP, Return Loss Qual-
ity tests for load mismatches that affect the wire’s power
and data transfer capability. "Green" colored adapters (3
pcs) used with the RLQ test are included.
LENGTH-
RLQ
PACK (MODEL 2 AND 3 ONLY)
CABLE TESTING APPS
DEVICE TESTING APPS
DATA DEVICES
Locate a cable connection to a switch port by blinking the
switch’s Link LED.
PORT BLINK CABLE DETECTION
Detect PoE voltage and display its amplitude and location
on the cable (midspan, endspan or both).
POWER OVER ETHERNET / PAIRS USED
Plug into any active port (computer, switch, VoIP,
access point) and display its capabilities.
10/100/1000 DETECTION/DISPLAY
SPEAKER / ALARM DEVICES
Locate speakers by audibly “popping” them. Alligator
clips included with all LVPro Models.
Especially designed to properly map and label A/V
speaker wires. Requires remote kit.
SPKR 7.1 ID# MAPPER (8 PCS)
SPEAKER POPPER
Test alarm system and other backup batteries
by doing a loaded battery test. Adapter included.
ALARM BATTERY TEST (LOADED)
VIDEO DEVICES
CCTV systems require a minimum of 1Vpp to DVR.
Measure and display Vpp of video signal.
CCTV / Vpp (peak to peak voltage)
PHONE DEVICES
Detect central office telephone connections.
Display voltage and cable location (up to 4 phones).
PHONE
Locate multiple wall jacks for CAT5/6
and coax. Requires Remote kit(s)
WALL JACK IDENTIFIERS
TONE LOCATING APPS
Store for later printing up to 250 tests (all cable types). All
data is stored except RLQ. USB and software included.
PRINT UP TO 250 REPORTS (MODEL 3 ONLY)
Place a tone on one end and detect it on the
far end. Requires remote tone probe.
TONE CABLE DETECTION
5