Lvpro manager software? click here, Lvpro manager software, Install lvpro manager – Triplett Low Voltage Pro User Manual
Page 14
LVPro Manager
Software
1. Adds Test APPS to your LVPro: As an example, let's say you want
to move from Model 1 to Model 2 or buy a single Test APP. For this task,
LVPro Manager acts like a shopping cart. It lists the cost of the APPS
and handles the downloading of the APPS to the LVPro.
2. Upgrades LVPro firmware. Firmware is the code buried in the LVPro
that makes the computers perform their functions. On the rare occasion
that you may need to upgrade your firmware, it's nice to know that you
can stay up to date without sending the tester back to the factory.
3. Prints and Delete Reports (LVPro Model 3 only): If you own a
Model 3 and are storing test results, use the LVPro Manager software to
download the reports to your PC. Plus, use it to delete reports from the
LVPro after they have been safely downloaded to the PC.
4. Configure the LVPro Length APP (LVPro Model 3 only):
Select Tester > Configure length
VOP: Set values for each of the cable types. Reset the VOP
back to factory settings.
Feet/Meters: Set the LVPro to Feet or Meters.
Note: This can also be done manually without the LVPro software.
For VOP adjustments, select the Knob icon (on the LCD).
For Feet/Meters, disconnect and reconnect the battery.
WHAT DOES IT DO? LVPro Manager link together your PC and LVPro
(use the included USB cable to connect the two). It performs 3 tasks:
Install
LVPro Manager
1. Don't look for a CD (it's on the web).
Go to www.bytebrothers.com and follow directions to the Low
Voltage Pro page where you will see this.
2. Click on the above hammer to start the download and installation.
When asked security questions, answer YES or OK. The LVPro Manager
icon soon appears on your Windows START menu. The LVPro Manager
Software is now ready to run.
This icon appears on
your Windows
START menu after
the software is
installed.
3. Run the LVPro Manager Software:
1) Connect the LVPro to your PC with the included USB cable.
2) Turn on the LVPro tester.
3) Click the LVPro Manager icon.
“Nails it
every time!”
LVPro Manager Software?
Click here.
12