Triplett Low Voltage Pro - Manual (Page 24)

22
SPECIFICATIONS
Cable Types Tested (All LVPro models)
Shielded and unshielded twisted pair. All cable categories.
Coax. All types.
Telephone.
Speaker and alarm wire.
Cable Tests (all LVPro models)
Opens, shorts, reversals, split pairs, wiremap,
propagation delay, skew, ohms. Feet and meters selectable.
Advanced Cable Tests (Models 2 and 3)
Length and distance to fault.
Adjustable and standard VOP settings for accurate length of all cables.
RLQ. Return Loss Quality.
Locating cable ends, speaker wires and switch ports (all LVPro models)
Wall jack identifiers (RJ45, coax and mixed kits available).
Speaker identification. Qty 8. Available separately.
Port Blink. LVPro lights the LED on the switch port.
Device tests
Speakers: Audible popper (All LVPro models)
Network Devices (Model 3)
10/100/1000 advertised speed and cable pairs used.
PoE Volts and cable pairs used.
CCTV camera video signal: Measure peak to peak volts.
CATV (cable TV) Requires min 30mVpp signal.
Battery test (loaded) (Model 3)
100ma loaded test (for 12V alarm and other backup batteries)
Printed Reports (Model 3)
Stores 250 cable test reports in flash memory.
Upgradeable (All LVPro models)
Web upgradeable. Software and USB cable included with all models.
Voltage protection (All LVPro models)
DC Volts: 100
AC Volts: 70
Length measurement (Models 2 and 3)
Max (all wire types): 1000' (305 m)
Min split pairs: 6' (2m)
Min RLQ: 20' (7m)
VOP calibration: Min cable sample 150' (50m)
Battery
Type: 9V alkaline
Life: Operating: 24-30 hours
Standby (1 year)
Timeout (battery saver): 30 mins
LCD viewing angle: 60 degrees