Triplett Wizard II – PN: VTX455 - Manual (Page 8)

IP/CCTV Tester User’s Manual
4
2.3.8 RS485 data test
Analyze the data coming from a RS485/RS422 device. The data is displayed in hexadecimal format.
2.3.9 PTZ address scanning
Discover the address of the PTZ camera.
2.3.10 Image magnification（10xZoom）
Set image 10x zoom, can view and display the details by 1x、2x、3x、4x、5x、6x – 10X zoom in the
monitor and tester.
2.3.11 Video snapshot
Capture the video image and save the current video frames as a JPEG file
2.3.12 Video record
Record and save the current video on a SD card.
2.3.13 Video playback
Playback the video images that have been saved on the SD card. The file directory name that is created
is based on the date setting of the tester.
2.3.14 Port flicker
Use this feature to blink the link LED on a switch port. Perfect for tracing the location of a cable that is
terminated into a live switch port.
2.3.15 IP address scan
Quickly determine a camera’s IP address with the IP address scan feature. The IP address scan steps
through every possible address in the network’s subnet to determine the IP camera’s address. The
subnet is entered into the tester as part of making the tester a part of the same network .
2.3.16 Link monitor
The link monitor lists the IP address of all network devices that it discovers in its own subnet. This is
useful in making sure there is not a conflict with new IP addresses that are added to an existing network.
2.3.17 PING test
PINGING is a very popular network debugging tool. First, configure the tester with its own IP address
to make it a network device, then you use the tester to contact (ping) other Ethernet devices.
2.3.18 POE tester
Detect and display the existence of PoE power. When PoE power is present, the tester will measure and