Triplett Wizard II – PN: VTX455 - Manual (Page 6)

IP/CCTV Tester User’s Manual
2
2.Introduction
2.1 General
The Camera Wizard II IP/CCTV tester is designed for the installation and maintenance of IP and CCTV
cameras and devices. CCTV tests: Video display, PTZ control, DC12V output power, audio test, color
generator, RS485 data decoding, picture and video recording, and image magnification. IP camera
tests: IP address scanning, PING testing, Link monitor, POE measurement, Port flicker and CAT5/6
cable testing. Note: The color LCD screen will only display CCTV images (not IP images).
2.2 Features
 High definition 3.5”TFT-LCD color display, 480(RGB)x320 (CCTV only)
 Built-in LED flashlight
 User-defined shortcut keys（F1 and F2）
 Support for both NTSC/PAL video formats
 10x zoom feature to magnify the video image (CCTV only)
 Record and playback CCTV snapshots and videos using a micro SD card
(removable).
 IP address scan to determine an IP camera’s IP address
 PING an IP address to verify the connectivity of IP cameras or network devices
 POE measurement to test the PoE switch’s voltage to the IP camera
 Port Flicker blinks a switch port’s link LED. Perfect for tracing cable locations.
 Cable testing jack to test the pairs of a CAT5/6 cable.
 Link monitor to display IP address usage on the network.
 PTZ address scan to determine the address of a CCTV camera.
 RS232/RS485/RS422 communication link to drive the PTZ unit.
 PTZ testing for cameras so equipped. Driver supports more than thirty protocols.
 DC12V 1000ma power output to temporarily power CCTV camera during test.
 Audio input jack to test audio signals
 Lithium Ion Polymer Battery . This power-efficient battery can last 11 hours during
normal use. Charging time is 4 -5 hours.