Triplett 1101a User Manual
Page 21
21
Note: When replacing the fuse, use the exact type specified. Do not substitute a
250V fuse for the 500V fuse.
9.2 Cleaning:
To clean the outside of the meter, use a cloth dampened with a mild
detergent solution. Do not use any abrasive cleansers, or chemical
solvents that may damage the case of the meter.
9.3 Calibration:
Periodic calibration of the meter will insure that it is accurate and
performing in accordance with its design specifications. A one year
interval is suggested. Annual calibration is not included in the
warranty.
9.4 Service:
TRIPLETT PRODUCT RETURN INSTRUCTIONS
In the unlikely event that you must return your Triplett equipment for
repair, the following steps must be taken.
1) Call 1-800-TRIPLETT to obtain a Return Material Authorization
(RMA) number from Customer Service.
2) Enclose a copy of the original sales receipt showing date of purchase.
3) Clearly print the RMA number on the outside of the shipping container.
4) Return to: Triplett Corporation
One Triplett Drive
Bluffton, OH 45817
ATTN: Repair Dept.
Be sure to include a full description of the problem, and a telephone number,
street address, or email address, where you can be contacted, and a return
address where the meter can be shipped to upon repair.