Tri Tool 301 Tube Squaring - Manual (Page 6)

6
TRI TOOL INC.
92-0630 Rev. 130308
GENERAL DESCRIPTION
The Model 301*, Tube Squaring Machine is a lightweight portable machine designed
for facing and squaring .125” to 1.102” (3.2 mm to 28.0 mm) outside diameter tubing
with an ability to handle up to .125” (3.2 mm) thick wall.
The Model 301 Tube Squaring Machine has several Motor options.
There is an integral, variable speed Air Motor.
There is an integral, variable speed 110 VAC, 500 watt Electric Motor.
There is an integral, variable speed 220 VAC, 500 watt Electric Motor.
There is a Battery supported DC Electric Motor.
Precision inside diameter Collets hold the tubing round to accurately square and
face the tubing with a minimum burr.
The portable version uses a Nut to retain the Collet.
There is a Quick Lock Clamp System to retain the Collet available.
This Machine accepts its own torque through the Collet clamping system.
The Cutting Head accepts Squaring Tool Bits or combinations of Squaring, Beveling
or ID deburring Tool Bits.
All required tools for operation of the Model 301 are supplied with the Machine or
with the accessory Collet Adapters.