Tri Tool 301 Tube Squaring - Manual (Page 16)

16
TRI TOOL INC.
92-0630 Rev. 130308
NOTE:
NOTE:
NOTE:
Connect the Model 301 to the air supply and pull the trigger to start rotation of the
Cutting Head.
Ensure that the air supply has an adequate FRL (filter/regulator/lubricator)
installed and adjusted properly.
Power requirement for a Model 301 equipped with an Electric Motor.
The 110 VAC version will require a 110 VAC outlet.
The 220 VAC version will require a 220 VAC outlet.
Connect the Model 301 to the required power supply and pull the trigger to start
rotation of the Cutting Head.
Location of the Various Controls
Location of the Various Controls