Tri Tool 224B Miter Mandrel - Manual (Page 20)

92-0839
TRI TOOL INC.
20
Align the torque pin holes in the end of the Mandrel Shaft with the torque pins in the
Adaptor Plate Assembly.
Install the Mandrel Shaft Assembly onto the Adaptor Plate Assembly and tighten
the Draw Rod to 75 to 100 ft-lbs (102 to 136 N
. m).
At this time, the Miter Mandrel should feel absolutely tight and rigid.
Before installing the 224B BEVELMASTER™, be sure to read the Operator’s
manual carefully, giving special attention to all safety cautions and warnings.