beautypg.com

Electrical characteristics curves – Delta Electronics Series E48SH User Manual

Page 6

background image

ELECTRICAL CHARACTERISTICS CURVES


Figure 12: Input reflected ripple current, i

s

, through a 12µH

source inductor at nominal input voltage and rated load current
(20 mA/div, 2us/div).

Figure

13: Output voltage noise and ripple measurement test

setup

Figure 14: Output voltage ripple at nominal input voltage and
rated load current (Io=30A)(50 mV/div, 2us/div)
Load capacitance: 1µF ceramic capacitor and 10µF tantalum
capacitor. Bandwidth: 20 MHz. Scope measurements should be
made using a BNC cable (length shorter than 20 inches).
Position the load between 51 mm to 76 mm (2 inches to 3
inches) from the module.

Figure

15:

Output voltage vs. load current showing typical

current limit curves and converter shutdown points.

Strip

Copper

Vo(-)

Vo(+)

10u

1u

SCOPE

RESISTIVE

LOAD

E48SH3R330_02162007


6