Tri Tool 208B Flange Facer - Manual (Page 8)

8
TRI TOOL INC.
92-1495 : Orig. 100728
Radial (Max. from Center Line)
9.16" (232.5 mm)
Feed Travel (Auto)
7.90" (200.7 mm)
CUTTING CAPACITY
Max. Chip Width
.020" (.51 mm)
Range
1.75" (44.5 mm) to 16.50" (419.1 mm)
MATERIAL CUTTING CAPABILITY
Most stainless steels, carbon steels, inconels, etc., provided the Rockwell hardness
is less than Rc 35.
FEED RATE
.013" (.33 mm) to .026" (.66 mm) per revolution.
MOUNTING
ID Range
1.63" (41.4 mm) to 8.63" (219.2 mm)