Tri Tool 208B Flange Facer - Manual (Page 12)

12
TRI TOOL INC.
92-1495 : Orig. 100728
Tool Bit Depth of Cut
To adjust the depth of cut of the tool bit to flange, rotate the feed knob on the
Model 208B until the desired position is achieved.
Feed Knob, Tool Holder and Tool Bit
Tool Holder
Feed Knob
Depth of Cut Recommendations
Roughing Cut
.030" (.76 mm) max. depth
Finish Cut
.010". (.25 mm) depth
Roughing or Record Finish
.026" (.66 mm) feed (both trippers engaged)
Smooth Finish
.013" (.33 mm) feed (one tripper engaged)
Tool Bit