Tri Tool 206B Flange Facer - Manual (Page 8)

8
TRI TOOL INC.
92-0214 : Rev. 920331
Materials: Most stainless steels, carbon steels, inconels, etc., provided the Rockwell
hardness is less than Rc 35.
The Mandrel for the Model 206B is used to provide a mounting range from 1.63” to
6.49” (41.4 mm to 164.8 mm) inside diameter.
Clearances (with the Model 206B attached)
Radial 8.00" (203.2 mm)
max. from the centerline
of the pipe or tube
Rotating Parts Diameter 16.00" (406.4 mm)
Range 1.75" to 14.00"
(44.5 mm to 355.6 mm)
diameter
Auto Feed Travel 4.50"
(114.3 mm)
Feed Rate .013" or .026"
(.33 mm to .66 mm)
per revolution
Maximum Chip Width .200"
(5.1 mm)
Cutting Capacities