Tri Tool 206B Flange Facer - Manual (Page 14)

14
TRI TOOL INC.
92-0214 : Rev. 920331
WARNING:
Installation of a Tool Bit
Tool Bit (P/N 99-2555 or 99-2556)
Installation of a Tool Bit
Tool Bit (P/N 99-2553 or 99-2554)
Use of dull or improperly designed Tool Bits or Tool Bits not manufactured by
TRI TOOL INC. may result in poor performance and may constitute abuse of
this machine and therefore voids the TRI TOOL INC., factory warranty.
Slide the Tool Bit into the Tool Bit Holder Slot on the Tool Holder.
Lock the Tool Bit into position with the set screws on the side of the Tool Holder.