Timex W-270 - Manual (Page 5)

4 5
Watch Modes/buttons
sTArT/sPlIT
sToP/rEsET/sET
ModE
INdIGlo ®
NIGhT-lIGhT
hEArT rATE
display Icons and descriptions
y Flashing heart icon indicates watch is searching for a signal
from the Digital Heart Rate Sensor. This icon will flash as long
as the watch receives a signal from the Digital Heart Rate
Sensor.
w Stopwatch icon indicates the watch is timing your workout in
Chrono Mode.
H Hourglass icon indicates the watch is timing your workout in
Interval Timer or Timer Mode.
j Repeat icon in Interval Timer or Timer Mode indicates you have
set the timer to repeat at the end of a countdown cycle.
x Alarm clock icon indicates you have set the alarm to alert you
at a designated time.
N Melody icon indicates you have set the hourly chime to sound
every hour on the hour.
Small heart/timer icon in Time of Day or Recovery Mode when
the watch is tracking a heart rate recovery.
Indicates the TapScreen ™ Technology is activated.
k Indicates that the Night-Mode ® feature is active and any
button press will illuminate the INDIGLO ® night-light.
Watch Modes
Press MODE to cycle through the watch main functions
TIME > ChroNo > INTErvAl TIMEr > TIMEr > rECovEry >
rECAll > hrM sETuP > usEr INFo > AlArM
Most modes use the watch buttons in the same way, and button
labels are displayed on-screen close to the button.
sToP/rEsET/sET (doNE) = enter, accept and exit
ModE (NEXT) = advance to next setting option
sTArT/sPlIT (+) = increase/advance the setting value
hEArT rATE(-) = decrease/reverse the setting value
Note: Hold either button to rapidly increase/advance or decrease/
reverse the setting value.