Teo 6002TA - Manual (Page 9)

Tone Commander 6002TA User Manual 5
Conferencing Calls ______________________
Press the Flash key on the analog phone to place the current call on
hold and originate a new call. Dial the second party. After the second
party answers, flash again to conference all parties together.
If the second party is busy, does not answer, or does not want to join
the conference, hang up. Your phone will ring, and you will be
reconnected to the first party when you answer.
To add another party to the conference, flash again. Dial another party
as above. The number of parties that can be in a conference is
determined by your ISDN line provisioning from your service provider
(typically 3 or 6).
Transferring Calls _______________________
Calls can be transferred by establishing a conference call, then
removing yourself from the conference.
After establishing a call, press the Flash key, then dial the second
party. Any time after the second party begins to ring, you can flash to
conference all parties together, then hang up to remove yourself from
the conference. You can wait until the second party answers to
announce the call, or flash and hang up immediately for an unscreened
transfer.
The ISDN conference feature provisioned on your line must
support implicit transfer capability. Otherwise, the two remaining
parties will be disconnected when you hang up.
If the second party is busy or you want to abort the transfer, hang up
without flashing. Your phone will ring, and you will be reconnected to
the first party when you answer.