Teo 6002TA - Manual (Page 14)

10 Tone Commander 6002TA User Manual
POTS Ringing Control ___________________
You can control the audible ringing at the analog telephone device for
each call appearance. Similar independent settings in the User Options
menu (Setup
→ USER → RING → CONTROL) control ringing at the
6210/6220 telephone – refer to the 6210/6220 User Manual.
Call appearances set to ALWAYS will ring immediately at the POTS
port.
NEVER completely disables ringing at the POTS port for the call
appearance.
WAIT delays ringing at the POTS port for 2 to 7 ringing cycles (6
seconds per cycle).
When using a cordless phone on the analog port, select ALWAYS for
primary call appearances, and NEVER for secondary or shared call
appearances. You can select a WAIT option on primary call
appearances when the analog phone is used as a backup answering
position; set the POTS port ring delays longer than the 6210/6220
delays to ensure that calls always ring at the 6210/6220 first.
Note – You cannot answer a call on the POTS port unless it is ringing
(ring delays have timed out).
For fax or modem applications, select ALWAYS for the fax call
appearance, and NEVER for all other call appearances. Set the
6210/6220 ringing for the call appearance to NEVER; fax/modem calls
will only ring at the POTS port.
From the POTS Port Options menu, select RING.
(Setup
→ POTS → RING)
All multifunction keys that are programmed for call
appearances or DSS will have a steady green indication.
Press a lit key to view its current POTS ring control setting.
The key’s indicator will alternately flash red and green.
KEY01=ALWAYS RING \
ALWAYS NEVER WAIT2 WAIT3
KEY01=ALWAYS RING \
WAIT4 WAIT5 WAIT6 WAIT7