Teo 6002TA - Manual (Page 7)

Tone Commander 6002TA User Manual 3
Operation
Placing a Call ___________________________
Go off-hook on the analog phone, wait for dial tone, then dial the called
number. The originating call appearance indicator on the 6210/6220
will light amber while that line is in use by the POTS port.
The call appearance selected for originating POTS calls (see page 13)
is used if idle. If this call appearance is in use, another primary
originating call appearance will be used if available.
Only one call can be active at a time. Calls cannot be placed on the
POTS port if the 6210/6220 is on an active call. When the POTS port is
busy, no calls can be placed from the 6210/6220; the display will show
“ANALOG PORT IN USE” if you attempt to place a call from the ISDN
phone.
Answering a Call ________________________
Call appearances will ring at the POTS port after the selected ring
delay (see page 10), unless the ring delay is set to NEVER. Go off-
hook on the analog phone to answer the call. The originating call
appearance indicator on the 6210/6220 will light amber, and no calls
can be placed from the 6210/6220 while the POTS port remains in use.
The 6210/6220 has ring delay settings independent from the POTS
port. Calls may ring at the 6210/6220 before ringing at the POTS port if
the POTS port has a longer ring delay.
If multiple calls are ringing, the first call appearance to ring at the POTS
port is answered when going off-hook on the analog phone.