Teo 6002TA - Manual (Page 8)

4 Tone Commander 6002TA User Manual
Switching a Call Between the POTS Port and
Speakerphone or Handset ________________
Go off-hook on the 6210/6220 with either the Spkr key or the handset
to switch a call from the analog phone to the 6210/6220 speakerphone
or handset. The call will be disconnected from the POTS port.
To switch the call back to the analog phone, press the # key on the
analog phone. You will not hear dial tone, and the # tone will not be
sent out over the ISDN line. You can continue to switch the call
between the phones regardless of where the call was answered.
This feature is disabled if Privacy is set to ON (see page 11).
Call Waiting ____________________________
Most telephones have a Flash key that sends a timed hookflash.
This key is used during call swapping, conferencing, and
transferring. If your analog phone does not have a Flash key, you
can send a flash by quickly pressing and releasing the hookswitch.
When the POTS port is in use and another call rings, a call waiting tone
and/or a caller ID display may be sent to the analog phone. Press the
Flash key on the analog phone to place the current call on hold and
answer the incoming call. Swap between the calls by flashing.
Call waiting may be set for caller ID, call waiting tone only, or disabled
(see page 12).