Ringing control for individual line appearances, Local call forwarding – no answer delay, Personal ringing tone offhk contrl lcfwd – Teo IP Phone 7810 User Manual
Page 32: Offhook ring=single normal single
Teo IP Phone 7810 User Guide
32
The current off-hook ringing setting will be
displayed.
Select NORMAL or SINGLE to change the setting.
Press the
OK
key to return to the Personal Ringing
menu or press the
SETUP
key to exit Setup Mode.
Ringing Control for Individual Line Appearances
You can control the audible ringing at your telephone for each
line appearance.
Line appearances set to ALWAYS will ring immediately. Use
this setting for your primary line appearances.
NEVER completely disables ringing on the line appearance. Use
this selection for monitored line appearances that are normally
answered elsewhere.
WAIT delays ringing at your telephone for 2 to 7 ringing cycles
(6 seconds per cycle). Use this option for backup answering on
line appearances that are primarily answered on other phones.
Calls that do not ring, due to the ringing control selection, do
not display call information and are not recorded in the call log
until audible ringing begins.
From the User Options menu, select RING.
(
SETUP
→ USER → RING)
Select CONTRL.
All multifunction keys that are programmed for call
appearances swill have a steady green indication.
Press a lit key to view its current ring control setting.
If you want to change the setting for the selected
key, select ALWAYS, NEVER, or WAIT2-WAIT7.
Consecutive line appearances that share a single phone
number will use the same ringing control setting.
Press the
OK
key to return to the Personal Ringing
menu or press the
SETUP
key to exit Setup Mode.
Local Call Forwarding – No Answer Delay
This option sets the delay in seconds before an unanswered
ringing call is forwarded.
Note: If your phone is connected to a Teo UC System, call
forwarding delay is not controlled by this option.
From the User Options menu, select RING.
(
MENU
→ USER → RING)
Select LCFWD.
Using the dial pad, enter the time in seconds (2-99)
to wait before forwarding a ringing call.
LOC CFWD NOANSWR SEC=12
DELETE CLEAR 123
PERSONAL RINGING
TONE OFFHK CONTRL LCFWD
KEY01=ALWAYS RING ¤
WAIT4 WAIT5 WAIT6 WAIT7
KEY01=ALWAYS RING ¤
ALWAYS NEVER WAIT2 WAIT3
PERSONAL RINGING
TONE OFFHK CONTRL LCFWD
OFFHOOK RING=SINGLE
NORMAL SINGLE