Teletronics TT 2400 - Manual (Page 41)

Group Key renewal controls how often the Group Transient Key is changed. The Group Key renewal does not control
the update period for the pair wise Transient Key. The pair wise Transient Key is changed each time the Supplicant
authenticates, or re-authenticates.
802.1X Configuration
Remote RADIUS server configuration settings. There are two sections to setup 2 RADIUS servers for the
TT5800/TT2400 to connect to. At any given time the TT5800/TT2400 will connect to one RADIUS server for
authentication and will use the other one as a backup if that option is configured.
802.1X enabled
Option that enable or disable the remote RADIUS authentication.
Authentication timeout (mins)
The default value is 60(minutes). When the time expires, the device will re-authenticate with RADIUS server.
RADIUS server IP address
Enter the RADIUS server IP.
RADIUS server port number
Port used for RADIUS, the number of ports must be the same as the RADIUS server , normally the port is 1812.
RADIUS server shared secret
When registered with a RADIUS server, a pass word will be assigned. This would be the RADIUS server shared
secret.
MAC Address Authentication
Use client MAC address for authentication with RAIDUS server.
WEP Configuration
Short for Wired Equivalent Privacy, a security protocol for wireless local area networks (WLANs) defined in the 802.11b
standard. WEP is designed to provide the same level of security as that of a wired LAN.
Enable WEP
To enable the WEP Authenticator
Default WEP key to use

WEP Key 1-4
Select the key to be used as the default key. Data transmissions are always encrypted using the default key. The other
keys can only be used to decrypt received data.