Tech Source GFX 400 Series - Manual (Page 20)

GFX 400 Series Installation and Reference Manual
3-8
-cachedpixmap TRUE|FALSE Turn off the off-screen
cached pixmap feature.
Default is TRUE.
-propt displays current settings
-prconf displays hardware
information
-help shows complete usage
listing
NOTE: By default, the bit depth will be set to 8+24 for all
resolutions.
3.4.2.1 Examples
To configure the resolution on the GFX 400 card to
1152x900@66Hz, type the following:
prompt# mkoconfig -res 1152x900x66
NOTE: If no device is specified, mkoconfig configures the
console (assuming that the console is a GFX 400 card).
To verify the resolution prior to setting it permanently, add the
word "try" after the resolution name. This option will display a
test pattern on the screen until a return key is hit. Then the
resolution can be accepted or rejected. For example:
prompt# mkoconfig -dev /dev/fbs/mko0 \
–res 1152x900x66 try